Samsung Galaxy S6 Edge G925F Official Android 5.1.1 Lollipop XXU2BOFJ Stock Firmware [ How To Update]

XXU2BOFJ Android 5.1.1 Firmware Details:

Model SM-G925F
Model name GALAXY S6 Edge
Country United Kingdom / Ireland
Version Android 5.1.1
Changelist 5012324
Build date Fri, 19 Jun 2015 22:28:37 +0000
Product code XEU
PDA G925FXXU2BOFJ
CSC G925FOXA2BOFJ.

÷ Prerequisites:

•This tutorial is only for Samsung Galaxy S6 Edge G925F. Please don’t try this on any other variants of the phone.

•G925FXXU2BOFJ is an official firmware by Samsung for the Galaxy S6 Edge G925F.

•Make sure you backup all your data in your phone before proceeding.

•Rooting Warning: This is an official Android 5.1.1 build XXU2BOFJ update for Galaxy S6 Edge G925F, which means you will lose root as soon as you install this update. You will again have to root Galaxy S6 Edge to gain full system access and be able to install root apps again.

*Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

÷ How to Install XXU2BOFJ Android 5.1.1 on Galaxy S6 Edge G925F

Step 1 - Download Android 5.1.1 G925FXXU2BOFJ for Galaxy S6 Edge to your computer and extract the zip file.

Step 2 - Download ODIN v3.09 which will help you to install Android 5.1.1 on Samsung Galaxy S6 Edge G925F.

Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.


Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.

Click on ‘AP’ and select file with ‘AP’ in its name.
Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.

AP = PDA
BL = Boot Loader
CP = Modem
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S6 Edge has now been updated to Android 5.1.1 build XXU2BOFJ firmware update. Go to Settings > About phone to verify.