How to Update Nexus 6P to MHC19Q Marshmallow 6.0.1 April security patches

Nexus 6P can now be updated to new Android 6.0.1 MHC19Q April security patches.

Follow our guide below to download the update and install it yourself.

View my Flipboard Magazine.

 ÷ Prerequisites:

•This tutorial is only for Huawei Nexus 6P and we are not sure if it will work on the other variants of the Nexus 6P on other carriers.

•Your phone can be on any previousAndroid version or even on a custom ROM. It doesn’t matter at all. Thistutorial will still work for installing Android 6.0.1 Marshmallow.

*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

÷ How to Update Nexus 6P to MHC19Q Marshmallow 6.0.1 April security patches.


Step 1 – Download Android 6.0.1 Factory Image (angler-mhc19q-factory-f5a4e7a1.tgz) for Nexus 6P on your PC, if you haven’t already.

Step 2 – Connect your Nexus 6P to your computer using the USB cable.

Step 3 – Please make sure Fastboot is configured and properly installed on your computer.


Step 4 – Turn OFF your phone.

Step 5 – Get into the Fastboot/BootloaderMode on your phone. Turn ON the phone while pressing and holding the Volume Up + Volume Down + Power buttons till you see the Fastboot menu and START on top.

Step 6 – Now extract the downloaded file anywhere in your computer. Go to the folderhammerhead-MHC19Q and then copy/paste all the files to your Fastboot directory.

Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:

On Windows: Run the file “flash-all.bat”.
On Mac: Run the file “flash-all.sh” using Terminal.
On Linux: Run the file “flash-all.sh”.

Step 8 – That’s pretty much that you had to do for flashing the stock factory image on your Nexus 6P. Now wait and watch as the process is completed — or follow the on-screen instructions on your phone if in case you have to unlock the bootloader.

Step 9 – After the installation completes, the phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait with patience!

That’s it! Your Nexus 6P should now have the official Android 6.0.1 MHC19Q Marshmallowsoftware update installed on your phone using the stock factory image from Google! Go to Settings >About phone to verify.

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Nexus 6P latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.