How to Install TWRP Recovery on Moto E3 2016.
Add to Flipboard Magazine. November 25, 2016 by Android Custom ROM Fix™.
With the official TWRP now available, you can root Moto E3 easily via SuperSU or Magisk zip. If you happen to use Android Pay or play Pokemon Go, we recommend you to go with the Magisk systemless root method to root your Moto E3 so that you can easily disable root access (on-the-fly) when needed.
You Can Find Out How to Apply it Right Now Via This Easy Tutorial .
÷ Prerequisites:
This Tutorial is only for Motorola Moto E3 2016.
View my Flipboard Magazine.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install TWRP Recovery on Moto E3 2016.
1- Unlock bootloader on your Moto E3.
2- Get a TWRP recovery .img file and save to a separate folder on your PC.
3- Setup ADB and Fastboot on your PC.
4- Enable USB debugging on your device:
•Open Settings on your device.
•Go to About phone and tap seven times on Build number, this will enable Developer options.
•Now go back to Settings and you’ll see Developer options there, open it.
•Tick the USB Debugging checkbox.
5- Open the folder where you saved TWRP Recovery .img file in Step 1 above.
6- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
7- Connect your device to the PC. And type the following into the command window we opened in Step 5 above to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If you get a permission dialogue on your device to “Allow USB debugging”, tap OK.
8- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:
fastboot flash recovery twrp.img
└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.
9- Once TWRP is successfully flashed on your device, issue the following command to reboot:
fastboot reboot
That’s all. TWRP recovery should be installed on your device now. To boot into the freshly installed recovery, simply issue the adb reboot recovery command from PC command line when your device boots into system.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install TWRP Recovery on Moto E3 2016.
1- Unlock bootloader on your Moto E3.
2- Get a TWRP recovery .img file and save to a separate folder on your PC.
3- Setup ADB and Fastboot on your PC.
4- Enable USB debugging on your device:
•Open Settings on your device.
•Go to About phone and tap seven times on Build number, this will enable Developer options.
•Now go back to Settings and you’ll see Developer options there, open it.
•Tick the USB Debugging checkbox.
5- Open the folder where you saved TWRP Recovery .img file in Step 1 above.
6- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
7- Connect your device to the PC. And type the following into the command window we opened in Step 5 above to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If you get a permission dialogue on your device to “Allow USB debugging”, tap OK.
8- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:
fastboot flash recovery twrp.img
└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.
9- Once TWRP is successfully flashed on your device, issue the following command to reboot:
fastboot reboot
That’s all. TWRP recovery should be installed on your device now. To boot into the freshly installed recovery, simply issue the adb reboot recovery command from PC command line when your device boots into system.
How to Install TWRP Recovery on Moto E3 2016.
Reviewed by Unknown
on
5:13 AM
Rating:
Reviewed by Unknown
on
5:13 AM
Rating:
No comments: